The Hydro and Wind Company Securing a clean energy future, profitably

Enercon E48 800 kW Wind Turbine

The Enercon E48 800 kW Wind Turbine

The Enercon E48 800 kW Wind Turbine

What is the Enercon E48 800 kW wind turbine most suitable for?

The Enercon E48 800 kW Wind Turbine is suitable for :

    • Windy sites
    • Small / Medium sites
    • On-site generation
    • Factories
    • Seaports
    • Shopping Centres
    • Leisure Centres
    • Farms
    • Schools
    • Hospitals
    • Government and Institutional Buildings
    • Community
    • Commercial and industrial sites

Enercon E48 800 kW Wind Turbine Specification

Configuration Three blade, horizontal axis, upwind
Rated Power 800kW at 12m/s
Rotor Speed 16 to 32 rpm
IEC 61400-1 Turbine Class IIA
Site Average Wind Speed 8.5 m/s
Survival Wind Speed 59.5 m/s
Rotor Diameter 48 m
Swept Area 1,810 m²
Blade Material GRP (Epoxy)
Power regulation Pitch controlled variable speed
Generator Type ENERCON direct drive synchronous ring generator
Configuration 3-Phase, 400V, 50Hz – 60Hz
Brake & Safety System
Main Brake System 3 independent pitch control systems with emergency power supply
Secondary System Rotor brake and Rotor lock (maintenance purposes)
Automatic Shutdown triggered by High wind speed, grid failure, over-speed, all other fault conditions
Control Systems User Interface ENERCON SCADA
Available Hub Heights 50 m, 60 m, 75 m
Tower Type Tubular steel tower
Period and type Up to 15 year standard service package
Download Brochure Here

Are you considering a wind turbine project?

Renewables First are an experienced wind consultant and have a full project capability, from initial feasibility study through to wind consenting and installation.

The first step to develop any wind power site is to conduct a full Wind Turbine Feasibility Study.

If you are interested in installing a wind turbine, the first step is to Contact us to discuss your requirements and to complete a Wind Turbine Feasibility Study.

Pin It on Pinterest

Share This