The Enercon E82 E2 2300 kW Wind Turbine
What is the Enercon E82 E2 2300 kW wind turbine most suitable for?
The Enercon E82 E2 2300 kW Wind Turbine is suitable for :
- Windy sites
- Medium/large sites
- On-site generation
- Factories
- Seaports
- Farms
- Government and Institutional Buildings
- Community
- Commercial and industrial sites
Enercon E82 E2 2300 kW Wind Turbine Specification
| Turbine | |
|---|---|
| Configuration | Three blade, horizontal axis, upwind |
| Rated Power | 2,300 kW at 13.5 m/s |
| Rotor Speed | 6 to 18 rpm |
| IEC 61400-1 Turbine Class | IIA |
| Site Average Wind Speed | 8.5 m/s |
| Survival Wind Speed | 59.5 m/s |
| Rotor | |
| Rotor Diameter | 82 m |
| Swept Area | 5,281 m² |
| Blade Material | GRP (Epoxy) |
| Power regulation | Pitch controlled variable speed |
| Generator | |
| Generator Type | ENERCON direct drive synchronous ring generator |
| Configuration | 3-Phase, 400V, 50Hz – 60Hz |
| Brake & Safety System | |
| Main Brake System | 3 independent pitch control systems with emergency power supply |
| Secondary System | Rotor brake and Rotor lock (maintenance purposes) |
| Automatic Shutdown triggered by | High wind speed, grid failure, over-speed, all other fault conditions |
| Controls | |
| Control Systems User Interface | ENERCON SCADA |
| Towers | |
| Available Hub Heights | 78 m, 85 m, 98 m, 108 m, 138 m |
| Tower Type | Tubular steel tower |
| Warranty | |
| Period and type | Up to 15 year standard service package |
| Download Brochure Here | |
Are you considering a wind turbine project?
Renewables First are an experienced wind consultant and have a full project capability, from initial feasibility study through to wind consenting and installation.
The first step to develop any wind power site is to conduct a full Wind Turbine Feasibility Study.
If you are interested in installing a wind turbine, the first step is to Contact us to discuss your requirements and to complete a Wind Turbine Feasibility Study.